You are here: Home » Products » Catheter Solutions » Steerable Catheters » Bidirectional Steerable Tube

Bidirectional Steerable Tube

1 Main Lumen + 2 Pull-Wire Channels
We manufacture the tube. You integrate the handle. Send us a drawing or a requirement — we reply with DFM feedback and a quotation in 3 working days.

Quantity:
Availability:





Inquire Add to Basket

Product Description

Product Description

OEM / ODM · Built to your drawing

Bidirectional Steerable Tube
1 Main Lumen + 2 Pull-Wire Channels

We manufacture the tube. You integrate the handle. Send us a drawing or a requirement — we reply with DFM feedback and a quotation in 3 working days.

4 – 12 Fr180° – 270° per directionPTFE / Pebax / SS304Sample in 2 – 3 weeks

Send your requirementEmail us directly

ISO 13485Quality management system

4 – 12 FrOD range, larger on review

180 – 270°Deflection per direction

3 daysDFM feedback on drawings

Can we make it?

Three things decide it — and we do all three in-house

No trading, no outsourcing between steps. Extrusion, braiding, reflow, tipping and pull-wire assembly sit on one floor.

01

Single main lumen

0.5 – 3.0 mm ID, PTFE lined, sized to your guidewire or device.

02

Two symmetric pull-wire channels

0.30 – 0.60 mm bore, 180° apart in the wall.

03

Braid + multi-zone jacket

SS304 braid at PPI 30 – 60, Pebax 25D – 72D across 4 – 10 zones.

Material options

Pick your materials — we build around them

Every layer has a standard option and an alternative. Tell us to keep the standard set or pick your own.

Inner liner LUBRICITY

PTFE (standard) Etched PTFE · FEP · Polyimide

Reinforcement STIFFNESS

SS304 braid SS316L · Nitinol · Coil

Outer jacket HAND FEEL

Pebax 35D – 55D Pebax 25D – 72D · PA12 · TPU

Pull wire ACTUATION

SS304 0.20 mm 0.15 mm · 0.30 mm · SS316L

Marker bands VISIBILITY

Pt/Ir 90/10 · 2 bands 1 band · 3 bands

Surface FRICTION

Bare PTFE spray · Hydrophilic

Size range

What fits on this platform

Typical ranges. Outside them we review the drawing before quoting.

Parameter	Range
Outer diameter	4 – 12 Fr (1.3 – 4.0 mm) · below 4 Fr with review
Main lumen ID	0.5 – 3.0 mm
Pull-wire channel	0.30 – 0.60 mm bore · 2 channels, 180° apart
Wall thickness	0.08 – 0.20 mm · 0.05 mm on special order
Effective length	300 – 1,200 mm, cut to working length
Bending segment	20 – 100 mm · below 15 mm cannot reach 180°
Deflection	180° – 270° per direction, measured in 37 °C water

After you send it

DAY 1

Reply with questions

If something in the drawing cannot be built, we say so here.

DAY 3

DFM feedback + price

Cross-section, red lines, cost drivers, lead time and MOQ.

WEEK 2 – 3

Sample in your hand

First article with dimensional, deflection and symmetry data.

Scope: this page describes a semi-finished tube component. It is not a finished or registered medical device; no 510(k), CE mark or instructions for use are supplied. Typical values are confirmed at drawing review.